|
|
|
|
|
|
|
|
|
|
TRIODE TRV-A88SE |
User Manual |
|
|
KT88 single ended integrated amplifier, Output: 12watts +12watts at 8ohms, Frequency response: 15Hz- 40 kHz (+/- 1dB), Total distortion: 0.1%(1kHz), SN level: 88dB, Input sensitivity: 0.7V, Input impedances: 100kohm, Output: 6 and 8 ohm speaker taps, Input terminals: 3 (LINE 1 / 2 / 3), Power Consumption: 60watts, Tube Compliments: 2- KT88 2-12AX7(ECC83), Capacitors used: Toichi Oil capacitors(Japan), Resistors used: KOA very precise resistor(Japan), Weight 11.5kg, Dimension W230mm * D400mm * H 185mm
|
|
|
|
|
|
TRIODE TRV-A300SE |
User Manual |
|
|
300B single ended integrated amplifier, Max power class A: 8watts +8watts at 8 ohms, Frequency response: 15Hz- 50 kHz (+/- 1dB), Total distortion: 0.3%(1kHz), SN level: 85dB, Input sensitivity: 0.6V, Input impedance: 100kohm, Output: 6 and 8 ohm speaker taps, Input terminals: 3 (LINE 1 / 2 / 3), Self bias, Power consumption: 80watts, Tube Compliments 2- 300b 2- 6SN7, Components used:TOICHI oil capacitors(Japan), KOA highly precise resistors(Japan), Weight 11.5kg, Dimension W220mm * D372mm * H 190mm
|
|
|
|
|
|
TRIODE TRV-4SE |
User Manual |
|
|
Tube Pre-Amplifier, Circuit: CR type Class A amplification, Phono Circuit: NF type, MM cartridge , Frequency Characteristic: -1 and -3db (10Hz-100KHz), Signal to noise ratio: 96db, Output Impedance: 7Kohm, Input Terminal: 4 line (one pair front and three pairs rear), one pair record out, Output Terminal: three lines, Tube compliment: 6-ECC83-amplification stage, 2-5AR4 Rectifications, Weight 8kg, Dimension: W340 x D315 x H185 (mm)
|
|
|
|
|
|
TRIODE TRV-35SE |
User Manual |
|
|
EL34 ClassAB push-pull integrated amplifier, Output class AB: 45 Watts + 45 Watts at 8 ohms, Frequency response: 10Hz- 100 kHz (+/- 4dB), Total distortion: 0.1%(1kHz), SN level: 90dB, Input sensitivity: 0.4V, Input impedance: 100k ohm, Output: 6 and 8 ohm speaker taps and one headphone terminal, Input terminals: 4 (front 1, rear 3), Output terminals: 1 (rec out 1), Tube Compliments: 4- EL ?34 1-12AX7(ECC83) 2- 12AU7 (EC82), Power consumption: 120watts(no signal), max 240watts, Weight: 15kg, Dimension: W340mm * D315mm * H 185mm
|
|
|
|
|
|
TRIODE TRV-M300SE |
User Manual |
|
|
300B Parallel single ended Mono Blocks amplifier, Output: 20W + 20W in 8 ohms, Fixed Bias, Uses very precise resistor, KOA(Japan), TOICHI oil capacitor(Japan), Output: 6, 8, 16 ohms speaker taps, Frequency response: 10 Hz - 60 Hz (+1, -3db), Total Distortion: 0.3% (1KHz), Signal to noise ration level: 89db, Input Sensitivity: 0.8V, Tubes Compliment: Each mono block, 2-300B 1-12AX7 (ECC83) 1-12AU7 (ECC82)Input terminal: one balanced, one unbalancedDimensions: 176W x 200H x 440 D in mm, Weight: 15 Kg
|
|
|
|
|
|
TRIODE TRV-M88SE |
User Manual |
|
|
KT88 push-pull mono power amplifier, Output: Class AB, 60watts +60watts at 8 ohms, Frequency response: 20Hz- 55 kHz (+/- 1dB), Total distortion: 0.1%(1kHz), SN level: 90dB, Input sensitivity: 0.7V, Input impedance: 100kohm, Output: 6 , 8 , 16ohm speaker taps, Input terminals: 1 balanced, 1 unbalanced, Power consumption: 60watts(no signal), max 120watts, Tube Compliments: In each mono block, 2- KT88 1-12AX7 (ECC83) 1- 12AU7 (ECC82)Weight 15kg, Dimension: W176mm * D440mm * H 200mm
|
|
|
|
|
|
Copyright© 2000 Twin Audio Video, All rights reserved.
|
Terms of Use | Privacy Policy
|
|